Loading Events

« All Events

  • This event has passed.

Distribution Voltage Regulation Seminar – Parts 3 & 4

October 1, 2021 @ 9:00 am - 11:00 am

NOTICE – This session will be paid for by the North Jersey Section PES as a courtesy to our members and prospective members during these challenging times of COVID-19. There will be no charge for participation and Continuing Education Unit credits.

This session is being offered as a GoToMeeting (details below).

The seminar will cover:

Distribution Voltage Regulation Series: Methods to Regulate the Voltage on the Distribution Grid

Introduction: This is a 10 – session presentation meant to assist engineers in designing the proper voltage regulation
architecture for the distribution grid. Each session takes approximately 45-50 minutes with a 10-15
minute period at the end for questions. The presentations should prove beneficial to technicians and
engineers responsible for distribution standards and design, distribution planning engineers, power
quality engineers as well as SCADA/ communications engineers. Below is a brief description of each
session.

Part 3) LTCs, Regulators and their Controls

This session covers the series applied voltage regulation devices and the settings in the regulator/LTC
controls. Settings covered include bandcenter, Bandwidth, time delay, and Line Drop Compensation.
Blocking of the controls due to tap position, abnormal voltages and currents exceeding the rating of the
device are also covered.

Part 4) Capacitor Banks and Control

This session covers shunt connected capacitor banks, both fixed and switched. It also covers single
phase operated versus three-phase individual operated capacitor switching. It also discusses the types
of switches used with capacitor banks as well as the use of line post sensors and neutral current sensors.
Finally it covers the different control modes (Voltage, Var and current) as well as overrides
(temperature, time and remote).

Speaker(s): Bob McFetridge,

Agenda:
Two hours of instruction will be provided.

This session is being offered as a GoToMeeting:

https://global.gotomeeting.com/join/997477389

You must register through VTools in advance in order to receive your CEU Certificate. PLEASE NOTE: Your certificate will go to the email address you use to register through VTools and will have your name exactly as you enter it when registering. It will come from “IEEE Certificate ” Please make sure this address is in your safe senders list. If you have any problems with receipt of your CEU Certificates, please contact eab-ceuadmin@ieee.org

Please check your GoToMeeting connection in advance as there will be no support available.

Virtual: https://events.vtools.ieee.org/m/281557

Details

Date:
October 1, 2021
Time:
9:00 am - 11:00 am
Event Category:
Website:
https://events.vtools.ieee.org/m/281557

Organizer

rwquade@ieee_org
Email
rwquade@ieee_org

Venue

Virtual: https://events.vtools.ieee.org/m/281557
Virtual: https://events.vtools.ieee.org/m/281557 + Google Map
Social Media Auto Publish Powered By : XYZScripts.com