IEEE North Jersey Section

Talk on "Building a Career in Photonics and Available IEEE Resources" by Dr. Naresh Chand, Associate VP, Chapter Relations, IEEE Photonics SocietyCo-sponsored by: CH01178 - North Jersey Section Chapter, PHO36Speaker(s): Dr. Naresh Chand, Virtual , New Jersey, United States, Virtual: https://events.vtools.ieee.org/m/283218

NOTICE - This session will be paid for by the North Jersey Section PES as a courtesy to our members and prospective members during these challenging times of COVID-19. There will be no charge for participation and Continuing Education Unit credits.This session is being offered as a GoToMeeting (details below).The seminar will cover:Distribution Voltage Regulation Series: Methods to Regulate the Voltage on the Distribution GridIntroduction: This is a 10 - session presentation meant to assist engineers in designing the proper voltage regulationarchitecture for the distribution grid. Each session takes approximately 45-50 minutes with a 10-15minute period at the end for questions. The presentations should prove beneficial to technicians andengineers responsible for distribution standards and design, distribution planning engineers, powerquality engineers as well as SCADA/ communications engineers. Below is a brief description of eachsession.Part 3) LTCs, Regulators and their ControlsThis session covers the series applied voltage regulation devices and the settings in the regulator/LTCcontrols. Settings covered include bandcenter, Bandwidth, time delay, and Line Drop Compensation.Blocking of the controls due to tap position, abnormal voltages and currents exceeding the rating of thedevice are also covered.Part 4) Capacitor Banks and ControlThis session covers shunt connected capacitor banks, both fixed and switched. It also covers singlephase operated versus three-phase individual operated capacitor switching. It also discusses the typesof switches used with capacitor banks as well as the use of line post sensors and neutral current sensors.Finally it covers the different control modes (Voltage, Var and current) as well as overrides(temperature, time and remote).Speaker(s): Bob McFetridge, Agenda: Two hours of instruction will be provided.This session is being offered as a GoToMeeting:https://global.gotomeeting.com/join/997477389You must register through VTools in advance in order to receive your CEU Certificate. PLEASE NOTE: Your certificate will go to the email address you use to register through VTools and will have your name exactly as you enter it when registering. It will come from “IEEE Certificate ” Please make sure this address is in your safe senders list. If you have any problems with receipt of your CEU Certificates, please contact eab-ceuadmin@ieee.orgPlease check your GoToMeeting connection in advance as there will be no support available.Virtual: https://events.vtools.ieee.org/m/281557

Domain Adaptation via Enhanced Subspace Distribution Matching and Generative Adversarial Distribution MatchingSiya Yao, Ph.D. CandidateDepartment of Control Science and EngineeringTongji University, Shanghai, ChinaTime: 10am, Tuesday, October 5, 2021Place: ECEC 207, New Jersey Institute of TechnologyVirtual: https://njit.webex.com/meet/zhouAbstract: In the field of computer vision, without sufficient labeled images, it is challenging to train an accurate model. Domain adaptation aims to accomplish tasks on unlabeled target data by learning and transferring knowledge from related source domains. In order to learn a discriminative and domain-invariant model, a critical step is to align source and target data well and thus reduce their distribution divergence. Various traditional and deep methods are developed to deal with such issue. Most prior traditional approaches merely reduce subspace conditional or marginal distribution differences between domains but entirely ignoring label dependence information of source data in subspace. We propose a novel approach of domain adaptation, called enhanced subspace distribution matching (ESDM), which makes good use of label information to enhance the distribution matching between the source and target domains in a shared subspace. As for deep methods, many methods apply adversarial learning to diminish cross-domain distribution difference. Generative adversarial network loss is widely used in adversarial adaptation learning methods. However, it becomes difficult to decline distribution difference if generator or discriminator in GAN fails to work as expected and degrades its performance. To solve such cross-domain classification problems, we put forward a novel adaptation framework called generative adversarial distribution matching (GADM). In GADM, we improve the objective function by taking cross-domain discrepancy distance into consideration and further minimize the difference through the competition between a generator and discriminator, thereby greatly decreasing cross-domain distribution difference. Experimental results and comparison with several state-of-the-art methods verify both ESDM and GADM’s superiority in across-domain image classification.Siya Yao received her B.S. degree in Automation, from Donghua University, Shanghai, China in 2017. She is currently pursuing a Ph.D. degree in Control Science and Engineering with the Department of Control Science and Engineering, Tongji University, Shanghai, China. Since 2019, she has been working as a joint Ph.D. Student with the Department of ECE, New Jersey Institute of Technology, Newark, NJ, USA. Her research interests are in transfer learning and anomaly detection.Contact: Prof. Mengchu Zhou, zhou@njit.eduSpeaker(s): Siya Yao, Agenda: 10-11:10 Seminar and Social networkingRoom: 207, Bldg: ECEC, 323 MLK Blvd., Newark, New Jersey, United States, 07102, Virtual: https://events.vtools.ieee.org/m/281517

­­The IEEE North Jersey Section is offering a course entitled "C# .NET Programming". Since 2017, C# .NET has generated significant headway in Fortune 1000 enterprise development systems. Use zip code 10001, Dice.com lists 1,535 C# .NET jobs in the New York tri-state area daily!This course will cover the fundamentals of C# language, the .NET framework, Window form and web-based applications, ADO.NET, ASP.NET, and XML. It will be useful for anyone to develop applications based upon these tools.You will receive the IEEE completion certificate and earned 2.0 IEEE CEUs (converts to 20 PDHs). Microsoft Corp. has MCAD and MCSD certifications. You may wish to get certified by taking the necessary Microsoft exams with the knowledge gained from this course. Past attendees got jobs at Amazon, Apple, Facebook, Goldman Sachs, Google, IBM, Microsoft, Morgan Stanley, Oracle, Prudential, Samsung, UPS, Verizon, and other Global 500 firms.Instructor: Donald Hsu, PhD., has been a corporate manager for 27 years and is an experienced trainer. Since 2016, he has trained 800+ people in Android, Java, Oracle, UNIX, and C# .NET in 7 different organizations.Co-sponsored by: New Jersey Institute Technology, CAS/ED, AP/MTTAgenda: 1. Compare the enterprise development tools using Java to C# .NET2. Define Visual Studio .NET Version 2010 to latest3. Identify C# syntax, data type, control structures and common language runtime4. Distinguish methods, arrays, object-oriented programming5. Build graphical user interface, multithreading, files and streams6. Explain the benefit of using extensible markup language (XML)7. Select database, SQL server, and ADO .NET8. Choose ASP .NET, web forms, web services, advanced topics9. Present student ProjectsWHERE: Zoom Online or New Jersey Institute Technology, Newark, New JerseyWHEN: Tuesdays, October 5, 12, 19, 26, November 2, 9, 16, 2021, 6 to 9 pm.COST: IEEE members $500; Non-IEEE members $550.Contact: Donald Hsu, yanyou@hotmail.comREGISTRATION: C# .NET ProgrammingPlease mail the completed registration with a check, payable to “North Jersey Section IEEE” to:Donald Hsu, PhD, Chair Education Committee, IEEE North Jersey Section, P.O. Box 2093, Fort Lee, New Jersey 07024.Name: ______________________ Email address ______________ Non-member __ IEEE Member Member #:_________________Employer:___________________ Employer Address:_______________________________Home Address:__________________________ Business (day) telephone #:_______________ Home telephone #:________________Please enclose required fee payable to: North Jersey Section IEEE__ I wish to receive IEEE Completion Certificate Signature:___________________________________________New Jersey Institute Technology , Warren Street, Newark, New Jersey, United States

IEEE North Jersey Section offers "Big Data Marketing Research". Simplyhired.com lists 10,188 Data, Analyst, or Marketing jobs in the New York tri-state area daily! As an engineer, you never did marketing. Getting the MBA takes two years. This is the better alternative to learn marketing.This course deals with the collection, evaluation and analysis of the big data market-related information. Topics are: market research industry, problem definition, research process, focus group, secondary database, quantitative research, questionnaire design, sampling techniques, statistical testing, bivariate and multivariate correlation, communicating results and management reports. Using IBM SPSS software, you will perform detailed big data analysis in business, cyber security, criminal justice, healthcare, finance, social services, and marketing research firms.You will receive the IEEE completion certificate and earned 2.0 IEEE CEUs (converts to 20 PDHs). In addition, you may work as a data analyst or market researcher in any organization that needs your quantitative skills. Past attendees got jobs at Amazon, Bank America, Facebook, Google, IBM, Microsoft, Morgan Stanley, Oracle, Verizon, and other Fortune 500 firms.Instructor: Donald Hsu, Ph.D., has been a corporate manager and CEO for 27+ years and is an experienced trainer. Since 2017, he has trained 500+ people in Management, Marketing, Global Marketing, and Marketing Research courses in seven organizations. He does international business in 90 countries.Co-sponsored by: New Jersey Institute Technology, CAS/ED, AP/MTTAgenda: - Describe the big data market research industry, problems and research process- Understand the importance of primary big data collection, secondary database, and survey- Define quantitative research, measurement technique and sampling methods for big data- Explain the questionnaire design, big data processing and statistical testing- Build the knowledge of bivariate regression and multivariate data analysis- Communicate results, manage ethical issues, and prepare reports- Employ IBM SPSS software for frequency analysis, ANOVA, T-test and others- Review real-world marketing research using Harvard Business School cases- Present final Group ProjectWHERE:Zoom or New Jersey Institute Technology, Newark, New JerseyWHEN:7 Wednesdays, October 6, 13, 20, 27, November 3, 10, 17, 2021 @6 - 9 pmCOST:IEEE (& affiliate) members $500; Non-IEEE members $550.CONTACT:Donald Hsu: yanyou@hotmail.comREGISTRATION: Big Data Market ResearchPlease mail the registration form with the check (Checks payable to “North Jersey Section IEEE”) toDr. Donald Hsu, Chair Education Committee, IEEE North Jersey Section, P. O. Box 2093, Fort Lee, New Jersey 07024Name: _____________________________________________ Email address _________________________________ÿ Non-memberÿ IEEE Member Member #:_________________________ Member of _____________________________ technical societyEmployer:_______________________ Employer Address:__________________________________________________________Home Address:___________________________________Business (day) telephone #:___________________________________ Home telephone #:________________________________Please enclose required fee payable to: North Jersey Section IEEEI wish to receive the IEEE Completion Certificate Signature:___________________________________________Warren Street, Newark, New Jersey, United States

Virtual: https://events.vtools.ieee.org/m/253131

SELECTED TOPICS IN RF AND MICROWAVE TECHNOLOGIES FOR COMMERCIAL AND MILITARY APPLICATIONSTECHNICAL SESSIONS10 –12 LECTURES FEATURING SPEAKERS FROM LEADINGCOMPANIES, WITH EMPHASIS ON MILITARY ELECTRONICS,WIRELESS TECHNOLOGIES AND MICROWAVE COMMUNICATIONS.MINI SHOW FEATURING LATEST PRODUCTS(APPX. 40-48 EXHIBITORS)(COMPLIMENTARY LUNCH SERVED)Details of the schedule and speakers and the topics will be posted on the IEEE North Jersey Section Home page http://www.ieee.org/go/njsection by September 2021.Registration: On Site and vToolsFor further information contact:CHAIR - GENERAL-EXHIBITION: KIRIT DIXIT (201-669-7599), kdixit@ieee.orgCHAIR – TECHNICAL PROGRAMS: GEORGE KANNELL(973-261-1421),george.kannell@gd-ms.comTHERE IS NO CHARGE TO ATTEND THE SYMPOSIUM OR SHOW.Hanover Manor , 16 Eagle Rock Avenue , East Hanover , New Jersey, United States, 07936

Advanced Operators for Graph Neural NetworksDr. Yao MaDepartment of Computer ScienceNew Jersey Institute of TechnologyTime: 9pm-10pm, Tue., October 12, 2021Place: Virtual meeting, Newark, NJITAbstract:Graph structured data are ubiquitous in the real world such as social networks, molecular graphs, and emerging among a plethora of other diverse domains. Therefore, it is of great research importance to design advanced algorithms for representation learning on graph-structured data to facilitate improved predictions across numerous computational methods. Graph Neural Networks (GNNs), which generalize the deep neural network models to graph-structured data, pave a new way to effectively learn representations at both the graph and individual node levels. We have significantly contributed to the fundamental research of GNNs by developing novel algorithms and practical research of GNNs by investigating their safety issues and real-world applications. This talk presents two fundamental about key operations of GNNs, i.e., graph filtering operation and graph pooling operation. It first presents some commonly used graph filtering operations and then demonstrates how they can be observed from a unified graph signal denoising perspective. This talk also introduces a graph pooling operation based on spectral graph theory, which helps GNNs learn better graph-level representations.Bio:Yao Ma is an assistant professor in Department of Computer Science at New Jersey Institute of Technology (NJIT). He received his Ph.D. in Computer Science from Michigan State University (MSU) in 2021. His major research interest lies in Graph Neural Networks (GNNs) for representation learning on graph-structured data. He has significantly contributed to the fundamental research and practical research of GNNs, which leads to numerous innovative work in top-tier conferences such as KDD, WWW, SIGIR, WSDM, ICDM, and ICML. He was the leading organizer and presenter of two well-received tutorials on GNNs at AAAI'2020, AAAI’2021, KDD’2020, and KDD'2021, attracting more than 1000 attendees in total. His recent book Deep Learning on Graphs has attracted tens of thousands of downloads from more than 100 countries. He received the Outstanding Graduate Student Award (2019-2020) from the College of Engineering at MSU.Speaker(s): Yao Ma, 323 Dr. Martin Luther King Jr Blvd., ECE-NJIT, Newark, New Jersey, United States, 07102-1982, Virtual: https://events.vtools.ieee.org/m/281932

While no one can give job security, one can strive for career security through career growth. An important component of career growth is by learning and practicing soft skills. Workplace habits and expectations have changed significantly in the last several years. Surviving and thriving depends on your ability to grasp the broader picture and hone some essential skills. As an example, if we do not manage relations with managers and peers in the workplace, we will not have the resources to get our jobs done. Communication—of all kinds—is an essential part of this management. Can we ask better questions? How do we work with difficult people? Do we always say nice things, but carry a stick? Have we tried talking-up? Are we deadline-passionate, and how do we manage that?Do you believe that conflict holds creative potential, conflict is unavoidable and common, and conflict and negotiation are central parts of workplace life? If you do, you are already ahead in the game. For most of the remaining folks who get stressed out dreading conflict in the workplace, this presentation offers perspectives on conflict in the workplace and practical approach to handle conflicts or differences. We include discussions on topics such as handling criticism, the importance of being ever ready, managing your boss, managing peers, and how important it is for us to deviate from our comfort zones once in a while to set different expectations for everyone including ourselves. We will discuss all this and more with examples and anecdotes. You'll walk away more aware to train yourself to be relevant and successful in today's workplace.Co-sponsored by: North Jersey Section, Signal Processing Chapter,Speaker(s): Dr. Qiang Fan, Agenda: While no one can give job security, one can strive for career security through career growth. An important component of career growth is by learning and practicing soft skills. Workplace habits and expectations have changed significantly in the last several years. Surviving and thriving depends on your ability to grasp the broader picture and hone some essential skills. As an example, if we do not manage relations with managers and peers in the workplace, we will not have the resources to get our jobs done. Communication—of all kinds—is an essential part of this management. Can we ask better questions? How do we work with difficult people? Do we always say nice things, but carry a stick? Have we tried talking-up? Are we deadline-passionate, and how do we manage that?Do you believe that conflict holds creative potential, conflict is unavoidable and common, and conflict and negotiation are central parts of workplace life? If you do, you are already ahead in the game. For most of the remaining folks who get stressed out dreading conflict in the workplace, this presentation offers perspectives on conflict in the workplace and practical approach to handle conflicts or differences. We include discussions on topics such as handling criticism, the importance of being ever ready, managing your boss, managing peers, and how important it is for us to deviate from our comfort zones once in a while to set different expectations for everyone including ourselves. We will discuss all this and more with examples and anecdotes. You'll walk away more aware to train yourself to be relevant and successful in today's workplace.Room: M105, Bldg: Muscarelle Center, M105, , 1000 River Road , Teaneck , New Jersey, United States, 07666, Virtual: https://events.vtools.ieee.org/m/281566

Don Bender will discuss the network of Nike Missile bases in New Jersey including the installation at Riker Hill on the Livingston/East Hanover border that constituted an air defense system against a potential Soviet nuclear attack from the 1950s to the 70s. At one time, there were 14 Nike Missile Bases scattered across the state of New Jersey. The 42-acre Riker Hill facility which was purchased from the federal government for one dollar was converted into an Essex County Park in 1976 that includes 38 artist studios.Please register using the Registration Link:https://bccls.libcal.com/event/6412365Upon registration, a link to the Zoom meeting will be provided.This meeting has been organized by Montclair State University’s Harry A. Sprague Library, College of Humanities and Social Sciences, College of Science and Mathematics, School of Communication and Media, Office of International Engagement, WMSC Radio, Louis Stokes Alliance for Minority Participation, Disability Resource Center and the Center for Community Engagement.Funding has been made possible in part by the New Jersey Historical Commission, a division of Cultural Affairs within the Department of State, through funds administered by the Essex County Division of Cultural and Historic Affairs and the New Jersey Council for the Humanities, a state partner of the National Endowment for the Humanities. Any views, findings, conclusions or recommendations expressed in this series do not necessarily represent those of the National Endowment for the Humanities or the New Jersey Council for the Humanities.Additional support has been provided by the Montclair Society of Engineers, NJ Peace Action, IEEE North Jersey, Montclair TV34, Livingston Historical Society and the Livingston Public Library.Donald Bender has explored and documented Cold War military sites for two decades. He is the founder of Cold War Preservation, a research, advocacy and preservation consultancy. He has a particular expertise in former Nike missile installations. Bender has assisted the United States Army, National Park Service, federal, state and local agencies, museums, the Danish Foreign Policy Association and others with historical research, writing and public programs. His work has been featured in major news media including the New York Times. He has appeared on New York's WNBC-TV, on WABC-TV's Boston and Philadelphia affiliates, the Travel Channel, The History Channel and National Public Radio. He is the author of one book, numerous articles and a dozen entries for the Encyclopedia of New Jersey (Rutgers University Press) including the entry on “missile sites”.Co-sponsored by: Montclair State UniversitySpeaker(s): Don Bender, Montclair, New Jersey, United States, 07043, Virtual: https://events.vtools.ieee.org/m/285499

NOTICE - This session will be paid for by the North Jersey Section PES as a courtesy to our members and prospective members during these challenging times of COVID-19. There will be no charge for participation and Continuing Education Unit credits.This session is being offered as a GoToMeeting (details below).The seminar will cover:Distribution Voltage Regulation Series: Methods to Regulate the Voltage on the Distribution GridIntroduction: This is a 10 - session presentation meant to assist engineers in designing the proper voltage regulationarchitecture for the distribution grid. Each session takes approximately 45-50 minutes with a 10-15minute period at the end for questions. The presentations should prove beneficial to technicians andengineers responsible for distribution standards and design, distribution planning engineers, powerquality engineers as well as SCADA/ communications engineers. Below is a brief description of eachsession.Part 5) How FLISR Impacts Voltage RegulationThis session discovers how switching or FLISR schemes impact voltage regulation. When placing part ofone feeder onto a new feeder it can cause reverse power flow with regulators and also change the faultpower seen by capacitor banks which will cause a change in the Delta Voltage for the capacitor bank. Itcan also cause a loss of coordination with time delays between regulators and capacitor banks.Part 6) How DG Impacts Voltage RegulationThis session discusses how the introduction of solar and/or wind generation onto a distribution circuitcan impact the voltage regulation. Regulators can be in reverse power mode as well as capacitor banksand may not operate correctly. Depending on how the inverters are configured (unity pF, fixed pF orVolt/Var) the inverters may also impact the amount of reactive capacitive current required on the circuitand may impact the placement of switched capacitor banks. Finally the session looks at distributionSTATCOMs that may be required to mitigate voltage variations due to the volatile nature of the outputof DG.Speaker(s): Bob McFetridge, Agenda: Two hours of instruction will be provided.This session is being offered as a GoToMeeting:https://global.gotomeeting.com/join/761257597You must register through VTools in advance in order to receive your CEU Certificate. PLEASE NOTE: Your certificate will go to the email address you use to register through VTools and will have your name exactly as you enter it when registering. It will come from “IEEE Certificate ” Please make sure this address is in your safe senders list. If you have any problems with receipt of your CEU Certificates, please contact eab-ceuadmin@ieee.orgPlease check your GoToMeeting connection in advance as there will be no support available.Virtual: https://events.vtools.ieee.org/m/281558

A Slide presentation aimed at 6-8 Grade students. The purpose is to explain what Engineering is and what they can do to progress towards a careeer in Engineering. The talk will highlight some of the fun aspects of working as an engineer and show how just about anyone can aspire to become an engineer.Co-sponsored by: Parsippany Main Library, Parsippany, NJVirtual: https://events.vtools.ieee.org/m/284289

- This webinar is intended for engineers working on the design and testing of high-speed digital electronics. Before verifying a design, the VNA must be calibrated to make sure that only the DUT will be measured. When using coaxial adapters, the calibration can be carried out in a straightforward way. However, many DUTs such as those on printed circuit boards do not have coaxial adapters, necessitating using fixtures to adapt to the special connectors. S-parameter de-embedding can be used to accurately compensate fixture effects and lead-ins.Date: Wednesday, Oct 27Time: 2:00 PM (EDT)Duration: 1 hourFor login information and password, please register by clicking the online link: (https://s4cloudae36f1aac.hana.ondemand.com/data-buffer/sap/public/cuan/link/100/36EB0DAF4470B4D1AE5D47A96F4A46C09FD7CA9F?_V_=2&_K11_=6341055BBB0F804878B5027DAF401B53757F9FBD&_L54AD1F204_=c2NlbmFyaW89TUxDUEcmdGVuYW50PW15MzAyMDM5LnM0aGFuYS5vbmRlbWFuZC5jb20mdGFyZ2V0PWh0dHBzOi8vZXZlbnQub24yNC5jb20vd2NjL3IvMzM0ODg2NS9DREFCMzNDMjk1QkNGMEM2OUI0NDYxOUYwNkVFMTRCMD9wYXJ0bmVycmVmPW5hX200Y19f&_K13_=327&_K14_=251795b2f73c7fdfeccfc20b2d95816e4bcb2a6d24ac5ae2a3e676bfd18c9056)Co-sponsored by: IEEE North Jersey SectionSpeaker(s): Joern Pfeifer, Frank-Werner ThuemmlerAgenda: Title: Advanced de-embedding - accurate fixture modeling for precise VNA measurements of non-coaxial DUTsDate: Wednesday, Oct 27Time: 2:00 PM (EDT)Duration: 1 hourFor login information and password, please register by clicking the online link: (https://s4cloudae36f1aac.hana.ondemand.com/data-buffer/sap/public/cuan/link/100/36EB0DAF4470B4D1AE5D47A96F4A46C09FD7CA9F?_V_=2&_K11_=6341055BBB0F804878B5027DAF401B53757F9FBD&_L54AD1F204_=c2NlbmFyaW89TUxDUEcmdGVuYW50PW15MzAyMDM5LnM0aGFuYS5vbmRlbWFuZC5jb20mdGFyZ2V0PWh0dHBzOi8vZXZlbnQub24yNC5jb20vd2NjL3IvMzM0ODg2NS9DREFCMzNDMjk1QkNGMEM2OUI0NDYxOUYwNkVFMTRCMD9wYXJ0bmVycmVmPW5hX200Y19f&_K13_=327&_K14_=251795b2f73c7fdfeccfc20b2d95816e4bcb2a6d24ac5ae2a3e676bfd18c9056)Bldg: Virtual , Virtual Technical Webinar Meeting, Virtual, New Jersey, United States

- Additive manufacturing (AM) processes for electronics have evolved to produce high-performance high-frequency passive components when compared to traditionally manufactured counterparts. Furthermore, AM, combined with subtractive methods such as pulsed laser machining, enables novel 3D antenna and RF packaging geometries that offer advantages over the traditional planar designs. The transformative nature of AM in the RF and antenna engineering community is widely recognized for aviation and space applications, as it brings additional logistic advantages with the ability to print devices on a single machine, in the field, ad-hoc, with the ability of quick re-design and repair. This presentation discusses recent advancements on laser-enhanced AM to achieve 3D multilayer passives devices and sensors, with feature sizes down to 10 µm, compatible with space and aviation environments. As the fragility of the worldwide electronics supply change has become more apparent in recent years, a vision on how AM will advance society and human space exploration will be discussed.- (https://event.on24.com/wcc/r/3163892/64D7F7E38BFA0F10B0CE3F4BAE8B1F9D))Title: Advancements on Additive Manufacturing of Wireless Electronics for Aviation and Space EnvironmentsDuration: 1 hour, 2 minutesAvailable On DemandCo-sponsored by: IEEE North Jersey SectionSpeaker(s): Prof. Eduardo Rojas, Agenda: - (https://event.on24.com/wcc/r/3163892/64D7F7E38BFA0F10B0CE3F4BAE8B1F9D))Title: Advancements on Additive Manufacturing of Wireless Electronics for Aviation and Space EnvironmentsDuration: 1 hour, 2 minutesAvailable On-DemandBldg: Virtual , Virtual Technical Webinar Meeting, Virtual, New Jersey, United States

NOTICE - This session will be paid for by the North Jersey Section PES as a courtesy to our members and prospective members during these challenging times of COVID-19. There will be no charge for participation and Continuing Education Unit credits.This session is being offered as a GoToMeeting (details below).The seminar will cover:Distribution Voltage Regulation Series: Methods to Regulate the Voltage on the Distribution GridIntroduction: This is a 10 - session presentation meant to assist engineers in designing the proper voltage regulationarchitecture for the distribution grid. Each session takes approximately 45-50 minutes with a 10-15minute period at the end for questions. The presentations should prove beneficial to technicians andengineers responsible for distribution standards and design, distribution planning engineers, powerquality engineers as well as SCADA/ communications engineers. Below is a brief description of eachsession.Part 7) Voltage Reduction and Smart Voltage ReductionThis session covers voltage reduction schemes that have been in place for years mainly to allow foremergency conditions when demand is greater than the generation supply. Next newer conservationvoltage reductions schemes are covered that allow for a reduction in demand over longer periods oftime. It also looks at the use of line drop compensation as a way of implementing CVR and finallyaddresses how flipping the circuit provides for additional CVR improvements.Part 8) Advanced CoordinationThis session looks at flipping the circuit in greater detail by using advanced features in LTC/regulatorcontrols as well as capacitor controls. It covers using negative X and Var Bias as a way of coordinatingLTCs/Regulators with switched voltage controlled capacitor banks. It also looks at the auto-adaptivefeature of capacitor controls to maintain coordination even after FLISR, switching.Speaker(s): Bob McFetridge, Agenda: Two hours of instruction will be provided.This session is being offered as a GoToMeeting:https://global.gotomeeting.com/join/590321965You must register through VTools in advance in order to receive your CEU Certificate. PLEASE NOTE: Your certificate will go to the email address you use to register through VTools and will have your name exactly as you enter it when registering. It will come from “IEEE Certificate ” Please make sure this address is in your safe senders list. If you have any problems with receipt of your CEU Certificates, please contact eab-ceuadmin@ieee.orgPlease check your GoToMeeting connection in advance as there will be no support available.Virtual: https://events.vtools.ieee.org/m/281559

The IEEE Communications Society (ComSoc) promotes the advancement of science, technology and applications in communications and related disciplines. It fosters presentation and exchange of information among its members and the technical community throughout the world. The Society maintains a high standard of professionalism and technical competency. The IEEE Communications Society is a professional society of the IEEE.The IEEE ComSoc New York Chapter is organizing a series of technical seminars for the New York area IEEE members and the general public. We invite researchers and professionals to share their latest work on a variety of topics in communications and related areas. This is the fifth seminar of the series. Together with our fellow IEEE ComSoc Chapters, we have the great pleasure to invite Dr. Mohammed Atiquzzaman, an IEEE Distinguished Lecturer, to talk about the interesting, exciting and yet challenging task of connecting spacecrafts to the Internet.Speaker(s): Prof. Mohammed Atiquzzaman, Agenda: 07:45 PM - 08:00 PM: Connecting to the ZOOM meeting08:00 PM - 08:05 PM: Welcoming & IEEE ComSoc Membership Promotion08:05 PM - 08:10 PM: Speaker Introduction08:10 PM - 09:00 PM: Presentation (50 minutes)09:00 PM - 09:10 PM: Questions and Answers (10 minutes)09:10 PM - 09:15 PM: Closing RemarksVirtual: https://events.vtools.ieee.org/m/282376